top of page

How to Keep Your QMS Documents Current When Standards Change

Nov 9
8 min read

Updated: Nov 10

Reviewed by Aaron Lyon, President of A.P. Lyon and former Director of Quality Assurance and International Regulatory, with more than 30 years in medical device quality. Last reviewed November 10, 2026.


A quality management system is written against a particular edition of a standard and a particular version of the regulations. The day it is approved, it is current. Then the world moves. Standards are revised, regulators issue new rules and guidance, certification schemes publish new versions, and inspection priorities shift. None of this announces itself inside your document control system. Unless someone is watching on purpose, procedures drift out of date while still carrying a valid approval signature.


Auditors and investigators notice. A procedure that cites a regulation section that no longer exists, a manual that still names the old edition of a standard, or a management review record that never mentions a known regulatory change all tell the same story: the system is maintained on paper, not in practice. This guide sets out a practical process for keeping your documents current, with the changes that matter right now as worked examples, and explains how the A.P. Lyon Update Service can do the watching for you.


Why documents go out of date


Documents rarely become wrong all at once. They age in a few predictable ways.


The standard is revised. ISO reviews every standard on a regular cycle, and a review can lead to a new edition. When that happens, certified organizations get a transition period to move to the new edition, and their documents need to follow.


The regulation changes. Regulators amend rules, replace them, or extend compliance dates. A change in regulatory text can make whole sections of a procedure obsolete, change the names of required records, or change which records an investigator may ask to see.


A certification scheme publishes a new version. Schemes built on top of ISO standards, such as FSSC 22000, publish their own versions with additional requirements and their own transition timelines.


Guidance and enforcement priorities shift. Even when the regulation itself is unchanged, new guidance documents and patterns in inspection findings change what "good" looks like. Our FDA 483 citation library shows how the same few requirements are cited again and again, and those patterns move over time.


Your own organization changes. New products, new sites, new suppliers and new markets can bring new requirements into scope. This guide focuses on external changes, but the same process handles internal ones.


What the standards already expect


Keeping up with external change is not optional extra work. The management system standards build it in.


  • ISO 9001 requires you to determine external issues relevant to your purpose and to monitor and review information about them (clause 4.1), and to determine the relevant requirements of interested parties (clause 4.2). Changes to the QMS must be carried out in a planned manner (clause 6.3), and changes in external and internal issues are an input to management review (clause 9.3).

  • ISO 13485 requires the organization to document the role it undertakes under applicable regulatory requirements (clause 4.1.1) and to keep documents under control (clause 4.2.4). Management review inputs include new or revised regulatory requirements (clause 5.6.2).

  • ISO 22000 requires monitoring of external and internal issues, including legal and regulatory developments (clauses 4.1 and 4.2), and the planning of changes to the food safety management system (clause 6.3).


Each of these requires the same outcome: you know about relevant changes, you assess them, you act on them in a controlled way, and you keep records that show you did.


A five-step process for staying current


Step 1: Decide what you watch, and who watches it


Start with a short list of every external requirement your system is built on: the standards and their editions, the regulations by part number, the certification scheme and its version, and any guidance documents your procedures rely on. Keep the list in one controlled place, such as an appendix to your quality manual or a register owned by the quality manager.


For each item, name the source you will check (the regulator's website, the standards body, the scheme owner, your certification body's client notices) and how often. Quarterly is a sensible default for most small and mid-sized companies. Assign an owner. A watch list without an owner is a list nobody reads.


Step 2: Screen each change for relevance


Most published changes will not affect you. For each one, record a short screening decision: does it apply to our products, processes, markets or certification scope? If not, note why and move on. If it might, carry it forward to an impact assessment. The screening record matters. When an auditor asks how you handled a change, "we looked at it on this date and decided it did not apply, for this reason" is a complete answer.


Step 3: Assess the impact on your documents


For a relevant change, identify every document it touches. Search your procedures, forms and manual for the affected clause numbers, regulation sections and defined terms. Check records too: a renamed record may need a new form, and a new requirement may need a new record that does not exist yet.


For each affected document, decide whether to revise it, replace it, or leave it as it is with a note explaining why. Resist the urge to rewrite documents that are not affected. A transition is an update, not a rebuild, and rewriting working procedures creates training and records problems of its own.


Step 4: Make the change through change control


Treat the update like any other planned change. Revise the documents through normal document control, with review and approval, a revision history that states the reason ("revised for ISO 9001:2026, clause 6.3"), and withdrawal of the superseded versions. Plan any retraining, and decide when each revised process takes effect. If the change has a compliance date, work backwards from it, and allow time for the revised process to run and generate records before your next audit or inspection.


Step 5: Close the loop at management review


Bring the results to management review: what changed outside, what you decided, what you revised, and what is still open. This creates the record that ties the whole process together, and it is exactly the evidence auditors look for under the management review requirements above.


The changes that matter now


The following changes illustrate the process. They are current as of November 2026. Always confirm dates and wording against the official text and with your certification body.


ISO 9001:2026


ISO 9001:2026 was published on September 16, 2026, replacing the 2015 edition. The structure, process approach and risk-based thinking are unchanged. The new edition adds or strengthens requirements on quality culture and ethical behaviour, climate change as a context issue, organizational knowledge, risks and opportunities, and the planning of changes. Certification bodies currently expect a three-year transition, with 2015 certificates remaining valid until about September 30, 2029, subject to final confirmation by Global ACI (formerly the IAF).


What to do: confirm your transition audit date with your certification body, plan the transition as a change under clause 6.3, and run a gap assessment against the new text. Our ISO 9001:2026 guide explains what changed, and the ISO 9001:2026 transition plan sets out the steps.


FDA QMSR for medical devices


Since February 2, 2026, FDA has applied the Quality Management System Regulation, the amended 21 CFR Part 820. It incorporates ISO 13485:2016 by reference and keeps FDA-specific requirements on definitions, links to other FDA regulations, record content and labeling controls. Management review, internal audit and supplier audit reports are no longer exempt from FDA review during inspections.


What to do: search your procedures and forms for old QSR section numbers and terms such as device master record, design history file and device history record, and revise them through document control. Our guide QSR to QMSR: What to Change in Your Procedures walks through each change.


FSSC 22000 Version 7


FSSC 22000 Version 7 was released on May 1, 2026 and becomes applicable on May 1, 2027, with a 12-month transition. Version 6 remains valid until then. Version 7 updates food chain categories and audit duration, takes in the 2025 editions of the ISO 22002 prerequisite programme standards, and revises additional requirements on food loss and waste, quality control, equipment management, allergen management, packaging design, and food safety and quality culture.


What to do: ask your certification body when it will audit you against Version 7, and compare your prerequisite programmes and additional-requirement procedures with the new version.


FSMA food traceability


FDA extended the compliance date of the Food Traceability Rule (21 CFR Part 1, Subpart S) from January 20, 2026 to July 20, 2028. If you handle foods on the Food Traceability List, the extra time is an opportunity to set up key data element records properly rather than in a rush.


MoCRA for cosmetics


FDA has not issued cosmetic GMP regulations, and the GMP rule does not appear in the current Unified Agenda. FDA withdrew its proposed talc asbestos testing rule on November 28, 2025. The Unified Agenda targets November 2026 for proposed rules on fragrance allergen labeling and on formaldehyde in hair smoothing products. The MoCRA duties already in force, including facility registration, product listing, adverse event reporting and safety substantiation, are unchanged.


What to do: keep facility registration and product listing current, and watch for the proposed rules. A proposed rule is not yet a requirement, but it shows where the requirements are heading.


Common mistakes


  • Waiting for the audit. The certification body will tell you about a change eventually, but usually as a finding.

  • Rewriting everything. Most changes touch a handful of documents. Change those, and leave working procedures alone.

  • Updating documents but not records. If a form changes, the records made on the old form need a clear cut-over date.

  • No record of the decision. A change you assessed and correctly decided not to act on is invisible unless you wrote it down.

  • Treating guidance as optional reading. Guidance documents and inspection trends are often the first sign of where enforcement is going.


Let us do the watching: the A.P. Lyon Update Service


If you use an A.P. Lyon quality or food safety system, you can hand most of this work to us. The Update Service is a yearly subscription that keeps the system you own current.


How the Update Service works


1. Subscribe. Choose the Single System plan ($149 per year) or the Consultant plan ($449 per year) and pay by card. When you check out, you create a free member login for this site using your email address. See the plans.


2. Get access to the subscriber-only Update Library. Your subscription unlocks the Update Library, a private page on aplyon.com that only active subscribers can open. Log in with your member account at any time to see everything published so far.


3. Receive an update every quarter. Each quarter we publish a standards update bulletin to the Update Library. For each A.P. Lyon system line it explains what changed in the standards and regulations, whether any A.P. Lyon documents were revised, and what your organization should consider doing, such as retraining, re-approving documents or updating records.


4. Download revised documents when a standard changes. When a change in a standard or regulation means an A.P. Lyon document needs revising, the revised editable Word documents are posted in the Update Library, with a summary of what changed in each one. You review them and bring them into your system through your normal document control.


5. Renew automatically, or cancel anytime. Your plan renews once a year on your subscription date, and your card is charged automatically. You can cancel at any time from the My Subscriptions page in your member account. Your plan then won't renew at the next yearly date. Cancelling does not trigger a refund of the current year.


Which plan is right for you?


  • Single System, $149 per year: for a company that bought an A.P. Lyon system and uses it at one site.

  • Consultant, $449 per year: for consultants who hold the A.P. Lyon Consultant license and use the systems with their clients. Revised documents may be used across all client sites under the Consultant license.


Good to know


  • The Update Service keeps a system you already own current. It does not include a new system.

  • Updates are delivered only through the subscriber-only Update Library, not by email.

  • Questions? Contact us before you subscribe.


Not sure where your current system stands? Start with the free QMS gap check.


Just getting started? The free Startup Quality Plan shows which procedures you need now, which can wait, and how long they take to put in place.

Recent Posts

See All

Comments


bottom of page