Food Allergen Management Program: What FSMA, ISO 22000 and FSSC 22000 Expect
Updated: Nov 10
Reviewed by Aaron Lyon, President of A.P. Lyon and former Director of Quality Assurance and International Regulatory, with more than 30 years in medical device quality. Last reviewed November 10, 2026.
Undeclared allergens are one of the most common reasons for food recalls in the United States, year after year. Most of those recalls do not come from a failed cleaning step. They come from a label that did not match the product: the wrong film loaded on the line, a reformulation that never reached the label artwork, or a supplier that changed an ingredient without telling anyone.
An allergen management program prevents both kinds of failure. It controls cross-contact in the plant and makes sure every package tells the consumer what is inside. This guide explains what the FDA's Preventive Controls for Human Food rule, ISO 22000 and FSSC 22000 expect, and how to build a program that works on the floor, not just in the binder.
Which allergens you have to manage
In the United States, the Food Allergen Labeling and Consumer Protection Act (FALCPA) and the FASTER Act define nine major food allergens:
Milk
Eggs
Fish
Crustacean shellfish
Tree nuts
Peanuts
Wheat
Soybeans
Sesame (added by the FASTER Act, effective January 1, 2023)
For fish, crustacean shellfish and tree nuts, the label must name the specific species or nut. If you sell into other markets, your list is longer. The EU, for example, regulates 14 allergens, including celery, mustard, lupin, molluscs and sulphites. Your program should cover every allergen required by every market you ship to, plus any your customers specify.
What the regulations and standards require
FDA 21 CFR Part 117
Under the Preventive Controls for Human Food rule, allergens are a chemical hazard. If your hazard analysis identifies a food allergen hazard that requires a preventive control, 21 CFR 117.135(c)(2) requires food allergen controls. These must include procedures, practices and processes to:
Ensure protection of food from allergen cross-contact, including during storage, handling and use
Label the finished food, including ingredients that are major food allergens, so that it is not misbranded under section 403(w) of the Federal Food, Drug, and Cosmetic Act
Allergen controls are monitored, and corrections or corrective actions are taken when they are not properly implemented. Verification includes review of monitoring and corrective action records. Unlike process controls, allergen controls do not have to be validated under 21 CFR 117.160, although many facilities validate their changeover cleaning anyway because it is the best evidence that cleaning works.
The current good manufacturing practice requirements in 21 CFR 117 Subpart B also apply. They require plants and equipment to be designed, maintained and cleaned in ways that protect against allergen cross-contact.
ISO 22000:2018
ISO 22000 does not have a single allergen clause. Allergens appear in several places:
Hazard identification (8.5.2) must consider allergens as chemical hazards, from raw materials, processing aids, rework and the environment.
Prerequisite programmes (8.2) must address cross-contamination, and ISO/TS 22002-1 sets out allergen management expectations for food manufacturing.
The hazard control plan (8.5.4) can manage allergens either as a CCP or, more often, as an operational prerequisite programme (OPRP) with action criteria.
FSSC 22000
FSSC 22000 adds its own requirements on top of ISO 22000 and the sector prerequisite programme. These include a documented allergen management plan covering a risk assessment of potential allergen cross-contact and the controls that reduce or eliminate that risk, along with requirements for labeling and for precautionary labeling. Check the current version of the scheme's additional requirements for the exact wording your auditor will use.
Building the program, step by step
1. Build the allergen map
Start with a list of every material on site that contains or may contain an allergen: ingredients, processing aids, rework, cleaning chemicals with allergen-derived components, and even items in the canteen if they can reach production. For each, record:
Which allergens it contains, from the supplier specification and allergen questionnaire
Where it is stored, and in what packaging
Which lines, rooms and equipment it touches
Which finished products contain it
The output is an allergen matrix: products in rows, allergens in columns. Add a second view by line, so you can see which lines run which allergens. This matrix drives every other part of the program.
2. Assess cross-contact risk
For each line and shared piece of equipment, assess how an allergen could reach a product that does not declare it. Common routes include:
Shared equipment that is difficult to clean, such as conveyors, depositors, mixers and fillers with dead legs
Airborne dust from powdered allergens like milk powder, wheat flour or sesame
Rework that contains a different allergen profile from the product it is added to
People and tools moving between allergen and non-allergen areas
Storage, where a damaged bag can contaminate pallets below it
Rate each route by likelihood and severity. Severity is usually high for allergens, so the assessment mostly drives how strong the controls must be.
3. Choose controls
The strongest control is segregation: dedicated lines, rooms or equipment for allergen-containing products. Where that is not practical, use a combination of:
Production scheduling: run allergen-free products first and the most allergenic products last, then perform a full changeover clean.
Physical separation: dedicated, color-coded storage below non-allergen materials, dedicated utensils and scoops, and covered transfer.
Air and dust control: local extraction for powder tipping, and separation of high-dust operations.
Personnel practices: smock or glove changes between allergen and non-allergen work, handwashing and controlled movement.
Rework rules: rework only into products with the same allergen profile, and record every use.
Changeover cleaning: a validated wet or dry cleaning procedure, with a verification check before the next run starts.
4. Validate changeover cleaning
A cleaning procedure that says "clean thoroughly" is not a control. Write a procedure for each line that defines who cleans, the method, the chemicals, the disassembly steps and the inspection points. Then validate it.
A practical validation approach:
Run the allergen-containing product under normal conditions.
Perform the changeover clean exactly as written.
Inspect visually. Visible residue is a fail.
Swab defined product-contact surfaces, including hard-to-clean points, and test them with an allergen-specific method, such as ELISA or lateral flow kits for the target protein.
Test the first product produced after the clean, if appropriate.
Repeat on at least three changeovers to show the result is consistent.
Use a test method that detects the specific allergen. General protein or ATP swabs show cleaning effectiveness, but they do not prove a specific allergen is gone. After validation, routine verification can rely on visual inspection plus periodic allergen-specific swabs.
Revalidate when you add a new allergen, change equipment, change the cleaning method or chemicals, or see a positive verification result.
5. Control labels
Label errors cause more allergen recalls than cleaning failures, so label control deserves its own procedure:
Artwork approval: every new or revised label is checked against the approved formulation and the allergen matrix by someone other than the person who created it.
Reformulation control: an ingredient or supplier change triggers a review of the allergen profile and every label it affects, through management of change.
Line start-up check: at each run and after each roll or label change, an operator confirms that the label on the line matches the product on the schedule, and records it.
Obsolete label removal: old labels are removed and destroyed when artwork changes.
Scanning: where possible, use barcode or vision systems to check the label automatically.
6. Manage suppliers
Your allergen map is only as accurate as your supplier information. Require an allergen declaration for each material, including allergens present on the supplier's site and lines, and require suppliers to notify you before any change. Review declarations at a set frequency. Where a supplier controls an allergen hazard for you, the FSMA supply-chain program in 21 CFR 117 Subpart G may apply.
7. Train and verify
Train everyone who handles materials, cleans equipment or sets up labels, with refresher training at least annually. Then verify the program: review monitoring records, run internal audits of allergen controls, and test the program with a mock withdrawal of an allergen-related lot.
Precautionary allergen labeling
Statements such as "may contain" or "made on shared equipment with" are voluntary in the United States. The FDA has said that advisory statements should not be used as a substitute for following current good manufacturing practices, and they must be truthful and not misleading. In practice:
Use precautionary labeling only after a risk assessment shows that cross-contact cannot be adequately controlled.
Do not use it as a blanket statement to cover poor controls.
Document the decision for each product, and review it when the line or product mix changes.
FSSC 22000 auditors will expect to see that precautionary labeling decisions are based on a documented risk assessment.
Records an auditor will ask for
Allergen matrix by product and by line
Cross-contact risk assessment
Allergen management procedure or plan, and the hazard analysis showing how allergens are classified
Changeover cleaning procedures and validation reports
Cleaning and verification records for each changeover, including swab results
Label approval records and line start-up label checks
Supplier allergen declarations and change notifications
Training records
Corrective action records for allergen deviations
Precautionary labeling risk assessments
Under 21 CFR 117, records must generally be retained for at least two years.
When something goes wrong
If an allergen control fails, for example a missed label check or a positive swab after cleaning, the response must be defined in advance:
Stop and hold affected product.
Evaluate whether product with an undeclared allergen could have been released.
Correct the problem, such as re-cleaning or relabeling.
Determine the root cause and take corrective action.
If product with an undeclared allergen reached the market, start your withdrawal and recall procedure.
Under 21 CFR 117.150, corrective actions for preventive controls must be documented.
Documents that help
A.P. Lyon's Allergen Management Procedure ($99) covers allergen mapping, cross-contact risk assessment, segregation, changeover cleaning and its validation, rework rules and precautionary labeling decisions. It works with the Product Labeling and Label Review Procedure, the Cleaning and Sanitation Procedure and the Supplier Approval and Control Procedure.
All of them are part of the Food Safety Management System, Complete ($1,295), and you can choose individual procedures in Build Your QMS with volume discounts.
Not sure where your quality system stands? Take the free QMS gap check: about 20 questions, an instant report of your gaps by clause, and the procedures that close each one.
Just getting started? The free Startup Quality Plan shows which procedures you need now, which can wait, and how long they take to put in place.
The documents need to be adapted to your site, products and markets, and a PCQI or other qualified person should review your allergen controls. They are documentation, not validation or certification.
Next steps
To see how allergen controls fit into the wider food safety plan, read HACCP Plan vs FSMA Food Safety Plan and our Food Safety Guide. Browse the food safety documents, or contact A.P. Lyon about consulting for help with your allergen risk assessment.



Comments